Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

To access and remove the fourth and final screw attaching the hood, the panel for the power button must be removed as follows:

Reach into the mouth of the printer and press on the small clip behind the power button. This allows the panel of the power button to be removed.

A picture of the power button panel removed is provided to show the location of the clip that needs to be pressed.

After pressing the clip, pull out the power button panel by pulling from right to left.

Ваш вклад лицензируется под свободной лицензией Creative Commons.