Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Note: It is recommended that step 3 and step 4 be completed simultaneously. The tabs are identical just on opposite sides.

Viewing from the front of the printer, there is a tab in the lower left corner.

Viewing the tab hole from the bottom of the printer.

Insert the mini screwdriver into the marked hole and pry out the tab.

Push in towards the blue sticker of the printer while pulling up on the case at the same time. Use one of the tools to keep the tab pried open.

This tab is the easiest to break so be very careful.

Ваш вклад лицензируется под свободной лицензией Creative Commons.