Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Loosen the ribbon cables from the board.

1-Directly below the viewfinder.

2-At the Base of the board.

3-At the top right near the selector wheel. 1 on top of the board 2 on the underside.

1-The center of the board, above the central hole.

With metal tweezers, remove the two white plastic clips from their sockets one on the base of the board and the other on the surface.

The bullets apply to the three pictures on the step.

Ваш вклад лицензируется под свободной лицензией Creative Commons.