Перейти к основному содержанию
Редактирование шага 26 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Locate the adhesive connecting the black and red wires above the green board.

Remove the adhesive by gently pulling it off with your hand.

Remove the copper tape that grounds the sensor heatsink to the sensor PCB.

Ваш вклад лицензируется под свободной лицензией Creative Commons.