Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 22 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Disconnect the digitizer cable by prying it straight up from its socket on the logic board.

When reconnecting the digitizer cable, do not press the center of the connector. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

Ваш вклад лицензируется под свободной лицензией Creative Commons.