Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the point of a spudger to flip up the locking mechanism on the I/O board connector.

Flip the spudger around and use the flat end to slide the I/O cable out of the connector.

Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.

Ваш вклад лицензируется под свободной лицензией Creative Commons.