Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Prepare an iOpener and lay it over the top edge of the phone to loosen the tape connecting the EMI shield to the front panel.

After a minute, insert an opening pick between the tape and display data cable.

Push the pick downwards until it is flush with the upper edge of the EMI shield.

Ваш вклад лицензируется под свободной лицензией Creative Commons.