Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

In order to remove the photo sensor, you will have to cut through glue and remove screws.

Use a knife to carefully slice through the glue at the tree points indicated. Try not to cut through anything but the glue to avoid damage.

WARNING: Knives are sharp. Treat them with respect.

Now remove the three .15 inch screws holding the photo sensor to the camera frame.

Ваш вклад лицензируется под свободной лицензией Creative Commons.