Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a #0 screwdriver to remove the two 2.5mm Phillips head screws located on the second layer of plating.

Remove the second layer of plating previously held down by the screws by gripping it with your fingers and pulling upward.

As there will be many screws being removed from the device, we recommend using a magnetic device such as the iFixit Magnetic Project Mat.

Ваш вклад лицензируется под свободной лицензией Creative Commons.