Перейти к основному содержанию
Редактирование шага 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently flip the PCB over 180deg so it is off the aluminum back panel.

Be CAREFUL not to damage the 8 flex cables

The PCB may be attached to the aluminium by some adhesive near the LVDS connector. IF so use a plastic pry tool or spudger to GENTLY lift the PCB up

Now lift the the back panel off the LCD separating the LCD from the back light assembly

Ваш вклад лицензируется под свободной лицензией Creative Commons.