Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger or your fingernail to flip up the retaining flap on the lower LCD power ribbon cable ZIF socket.

Be sure you are prying up on the hinged retaining flap, not the socket itself.

Pull the ribbon cable out of the connector with a pair of tweezers.

Grasp the ribbon cable as close to the connector as possible with the tweezers to avoid tearing it.

Ваш вклад лицензируется под свободной лицензией Creative Commons.