Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь
Редактирование шага 3 —

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Тип шага:

Перетащите чтобы изменить порядок

Use a suction cup or an iSclack to pull up on the glass and create a slight gap between the glass and the metal frame.

If your display is badly cracked, a suction cup may not adhere. It may help to first cover the display with a layer of packing tape. Alternatively, you can superglue your suction cup to the display.

Insert an opening pick into the gap.

There are tabs on the upper right side and upper left side where it is easier to get a tool under the display.

Slide an opening pick around the sides and bottom of the display to cut the adhesive. Apply more heat as needed.

The tape is much thinner on the bottom edge than the other three sides. Do not push the tool in too far or you will damage the screen permanently.

Work carefully—the glass is thin and will crack easily if you try to force it.

Separate the top edge last. There are antennas on both sides, so be careful not to damage them. If needed, you can use a bit of isopropyl alcohol to help weaken the adhesive.

Ваш вклад лицензируется под свободной лицензией Creative Commons.