Перейти к основному содержанию
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

If your replacement headphone jack includes the white plastic hold switch, simply reinstall the headphone jack. If your replacement part does not include the plastic hold switch, follow the next steps to transfer the plastic hold switch to your new headphone jack.

If you're just trying to remove the rear panel, you can skip Steps 15 and 16.

Remove the single Phillips screw nearest to the hold switch. Note: You may find adhesive holding the back of the screw in place.

Lift the plastic portion of the Hold switch away from the orange ribbon cable.

Ensure that the black notch lines up with the gray slider during reassembly of the switch (see picture 2).

Ваш вклад лицензируется под свободной лицензией Creative Commons.