Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.

Be sure you are prying up on the hinged retaining flap, not the socket itself.

Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.

Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.