Перейти к основному содержанию
Помощь
Редактирование шага 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the edge of a plastic opening tool to flip up the retainer securing the upper component board cable connector to its socket on the logic board.

Pull the connector away from its socket on the logic board.

Do not lift the cable upward as you disconnect it.

Ваш вклад лицензируется под свободной лицензией Creative Commons.