Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Тип шага:

Перетащите чтобы изменить порядок

Remove the fan wire from its plug on the top metal casing.

When removing the wire, do not pull from the wire. Instead, pull from the white plastic male connecter.

Remove the motherboard from the top metal casing. Lift from the side with the two USB plugs to avoid damaging the four back ports.

There is an adhesive between the top metal casing and the motherboard in the center, so you may have to apply more force than usual. Do not force the two pieces apart, but slowly apply more and more pressure until the adhesive gives.

Ваш вклад лицензируется под свободной лицензией Creative Commons.