Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.

Several clips along the top edge of the front panel form a partial hinge.

During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.