Skip to main content
Help
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The antenna loop board needs to be pried up (it is glued down). Gently use a plastic opening tool or spudger, to dislodge the antenna loop board. The board is connected to the antenna electronics by a small ribbon cable. This two-board assembly is very frail.

The two small antenna circuit boards can now be lifted up together, and their orange cable can be peeled from the display.

Ваш вклад лицензируется под свободной лицензией Creative Commons.