Перейти к основному содержанию
Помощь
Редактирование шага 22 —

Тип шага:

Перетащите чтобы изменить порядок

Attach the other end of your new cable to the logic board where the optical drive was connected.

Carefully wrap up the extra cable and store it to the side of the hard drive.

Getting everything to fit with these particular cables is somewhat challenging. If you don't stow the cable correctly, it will prevent the case from going back on all the way, and could also damage the hard drives.

Ваш вклад лицензируется под свободной лицензией Creative Commons.