Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

To open the Linksys WAP11, you will need a Phillips #1 screwdriver and a pair of metal tweezers.

Use the tweezers to remove the two rubber boots on the front two legs. The easiest way to do this is to insert the tweezers into the hole in the face of the boot. Once you are hooked behind the boot, pull outwards.

This will reveal two small Phillips-head screws. Remove them.

Keep these two screws together.

Ваш вклад лицензируется под свободной лицензией Creative Commons.