Перейти к основному содержанию
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

You will have to cut a couple notches out of the black cover where the wire runs. I dont get to solder much as you can tell. So I backed it up with super glue. Silly, but it works.

If your AC isn't working and your LEDs dont light up on your air flow buttons. Start at this board. New ones are about $175 and takes an hour if your fast to change out most mechanics would charge 2. This was free and took just over 2hr. I could do it in an hour now.

From the pic above you see you can bypass anything.

Ваш вклад лицензируется под свободной лицензией Creative Commons.