Skip to main content
Помощь
Редактирование шага 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

In the next two steps, you will install the hard drive into its bracket.

When inserting the hard drive, be sure to place it in its bracket cable side up with the SATA connector closest to the bulge in the bracket seen in the third picture.

Push the set screws into the grommets in the bracket and install the hard drive up into its bracket as seen in the second picture.

Ваш вклад лицензируется под свободной лицензией Creative Commons.