Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь
Редактирование шага 1 —

Тип шага:

Перетащите чтобы изменить порядок

ESD or Electro-Static Discharge can damage sensitive circuitry so do not touch anything on circuit board, such as connectors and resistors, with your bare hands!

This process may not work if you attempted to turn on /charge your device after it was exposed to water.

Hardware damage is always a possibility, so this process is only to give your device the best chance of survival.

After completing the preliminary teardown task you will need to carefully remove metal covers on front and back of the motherboard with your knife.

They simply unclip and clip back in.

Ваш вклад лицензируется под свободной лицензией Creative Commons.