Перейти к основному содержанию
Помощь
Редактирование шага 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following 15 screws:

One 4.4 mm black Phillips screw to the right of the ram slot.

Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.

If you leave the five uppermost orange screws in place, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained, and you won't need to reapply thermal paste as instructed two steps below.

One 6.2 mm black T6 Torx screw on the right side of the left fan.

Five 9.4 mm silver T6 Torx screws securing the left and right fans.

Ваш вклад лицензируется под свободной лицензией Creative Commons.