Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the power button circuit board from the support frame by pinching the left side, and pulling forward and to the left simultaneously.

Push up on the tab holding the secondary control circuit board with the spudger and pull it forward to remove it.

Be careful not to pull too hard on the cable connecting the power button control circuit board and the secondary control circuit board to the main circuit board

Ваш вклад лицензируется под свободной лицензией Creative Commons.