Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Before disassembling your printer, be sure that the printer has been unplugged.

Rotate the printer 90 degrees counter clockwise so that the side panel next to control panel is facing you.

Remove the two T10 12mm Torx screws from the left side panel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.