Skip to main content
Help
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 20 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.

Use the sharp end of a spudger to disconnect the speaker cable connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons.