Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following 4 screws:

One 3 mm Phillips in the channel between the optical drive and fan.

Two 6 mm Phillips from the upper and bottom end of the drive bezel.

One 6 mm Phillips with a collar from bracket extending from the lower left corner of the drive.

Ваш вклад лицензируется под свободной лицензией Creative Commons.