Skip to main content
Помощь
Редактирование шага 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.

Be careful not to break any components off the surrounding area on the logic board as you pry upwards.

Remove the rear camera from the iPhone.

There is a small rubber gasket that sits underneath the rear-facing camera. Make sure that it is properly seated before reassembly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.