Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the rubber inserts inside the the two purple feet located on the router's front case.

This may be a challenge, so try the following two methods:

Use a plastic opening tool. Insert the flat end of the tool into the seam and slowly pry the rubber feet out.

Use a metal spudger. Insert the point of the metal spudger directly into the hole of the rubber feet and pry the insert out.

Ваш вклад лицензируется под свободной лицензией Creative Commons.