Skip to main content
Help
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the flat end of the spudger between the front panel and the rear case at the lower left edge of the iPhone.

Slide the spudger up the left edge of the phone starting at the lower edge and moving towards the volume control buttons and silent switch, breaking up the adhesive holding the display in place.

Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.

Ваш вклад лицензируется под свободной лицензией Creative Commons.