Skip to main content
Help
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Pry under the left edge of the home button cable connector to disconnect it from its socket.

If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Ваш вклад лицензируется под свободной лицензией Creative Commons.