Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 21 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

When disconnecting any press connectors from the logic board, be sure to lift the connector straight up to avoid ripping the socket off the board.

Use the flat tip of a spudger to disconnect the battery connector from its socket on the logic board.

Bend the battery connector ribbon cable up slightly to prevent it from making contact and powering on the iPad.

Ваш вклад лицензируется под свободной лицензией Creative Commons.