Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 14 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If present, peel the piece of black tape covering the hidden screw near the power button.

Remove the 2.6 mm Phillips screw securing the logic board near the power button.

(Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw)

Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later.

Ваш вклад лицензируется под свободной лицензией Creative Commons.