Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Line up the small SATA connectors so that the narrow side of the connector on the SSD matches the narrow side on the enclosure connector.

Slide the drive in through the front of the enclosure until the SATA connector is fully seated.

The SSD's ports connect with the enclosure in only one way. If the ports are not lining up, rotate the SSD and try again.

Ваш вклад лицензируется под свободной лицензией Creative Commons.