Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 43 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently lift the glass panel perpendicular to the face of the LCD enough to clear the steel mounting pins attached along the underside of the top edge of the glass panel.

Pull the glass panel away from the lower edge of the iMac and carefully set it aside.

Don't use the suction cups to carry the glass panel—if either one loses its grip, the panel could fall and break.

After setting the glass panel down safely, be sure to release the suction cups, as the suction force over time can crack the glass.

During reinstallation, be sure to meticulously clean the inside of the glass panel and the face of the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is turned on.

Ваш вклад лицензируется под свободной лицензией Creative Commons.