Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Тип шага:

Перетащите чтобы изменить порядок

Insert the loop of the short cord through eyelet from the rear of the pedal Pass cord down and under rear black pulley, and attach spring to loop.

The eyelet is located under the top plate, toward front of the pedal.

Place the cord inside the pedal, under the main cross shaft, and let it lie there for now.

Move the pedal to the “toe-up” position.

Insert the loop of the long cord through the rear side of eyelet toward the front of the pedal.

Ваш вклад лицензируется под свободной лицензией Creative Commons.