Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If necessary, carefully dislodge the edge of the trackpad closest to the keyboard from its recess in the upper case by pushing it away from the brackets attached to the upper case.

Carefully push the trackpad connector and cable down through the slot cut into the upper case.

It may be necessary to use a spudger to help get the trackpad connector past the edge of the logic board.

Once the cable has been completely pulled through its slot in the upper case, pull the trackpad away from the outer edge of the upper case and remove it from the machine.

Ваш вклад лицензируется под свободной лицензией Creative Commons.