Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Тип шага:

Перетащите чтобы изменить порядок

Motherboard removal is next. We start with the wireless card—pretty straightforward.

After removing the five screws and three remaining cables connected to the motherboard, we discover there are two cables connected to the back of the board. This is inconvenient and means we need to remove the selfie camera with the main board.

Flipping the motherboard over reveals a pair of screws securing the lower assembly flex cable to the main board.

With those taken care of, we flip the ZIF connector for the selfie camera, slip it out of the socket, and the motherboard removal is complete.

Board shot for reference.

Ваш вклад лицензируется под свободной лицензией Creative Commons.