Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If necessary, peel off the foam bumper covering the subwoofer connector.

Using the flat end of a spudger, pry the subwoofer connector straight up off its socket on the logic board.

Be very careful. This connection is delicate, the socket can be easily broken off the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.