Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:

One 5.9 mm Phillips screw.

Two 1.9 mm Phillips screws.

One 1.9 mm Phillips screw.

If you have the A1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sink to the logic board:

One 5.0 mm Phillips screw

Five 1.9 mm Philips screws.

One 2.5 mm Phillips screw.

Ваш вклад лицензируется под свободной лицензией Creative Commons.