Skip to main content
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the flat end of a spudger into the gap between the SATA data connector and the hard drive.

Twist the spudger to separate the SATA data connector from the hard drive, then disconnect it from the hard drive.

Repeat this process for the SATA power connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons.