Перейти к основному содержанию
Редактирование шага 6 —

Тип шага:

Перетащите чтобы изменить порядок

Draw 5 ml of fluid into the second RockShox bleed syringe. Hold the syringe upright, cover the tip with a shop towel, and gently depress the plunger to purge any air bubbles from the syringe.

Remove the bleed screw at the seat post and thread the standard syringe bleed fitting into the seat post bleed port.

Depress the remote syringe plunger while pulling the seatpost syringe plunger out.

Do not empty the syringe. Leave at least 5 ml of fluid in each syringe during the procedure to avoid air entering the system.

Depress the seatpost syringe plunger while pulling the remote syringe plunger out. Repeat these steps until bubbles are no longer pulled from the remote and seatpost.

Ваш вклад лицензируется под свободной лицензией Creative Commons.