Перейти к основному содержанию
Редактирование шага 8 —

Тип шага:

Перетащите чтобы изменить порядок

Use a spudger to pry up the black and white coaxial cables attached to underside of the daughterboard.

Coaxial cable connectors and sockets are fragile. To avoid damaging the connectors, be sure to gently pry them straight off of the board.

When reconnecting these cables, lay the daughterboard upside down on the battery and use tweezers to carefully position each connector over its socket on the board, then press it straight down until it snaps into place.

Ваш вклад лицензируется под свободной лицензией Creative Commons.