Skip to main content
Помощь
Редактирование шага 13 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Pull the logic board straight out of the rear case, minding any cables that may get caught.

During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.