Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 19 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

Pry only under the hinged retaining flap, not the socket itself, or you may break it off the board.

Use the flat end of a spudger to gently back the keyboard ribbon cable out of its socket by pushing first at one side, then the other.

Ваш вклад лицензируется под свободной лицензией Creative Commons.