Skip to main content
Help
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 15 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Lift the display for enough clearance to disconnect the LCD thermal sensor cable connector from its socket on the logic board.

If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile, so be very careful when you connect back the sensor cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.