Skip to main content
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the single 5 mm T6 Torx screw securing the IR board bracket to the logic board.

The IR board and cable finger are now free from the logic board and may fall.

Remove the IR cable finger and move the IR board, with cable still attached, out of the way.

Ваш вклад лицензируется под свободной лицензией Creative Commons.