Skip to main content
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Lay the hot iOpener over the left edge of the iPad to soften the adhesive holding it in place.

Alternatively, use a heat gun, hair dryer, or heat pad to heat the perimeter of your iPad.

Wait about two minutes for the adhesive to soften before proceeding to the next step.

Ваш вклад лицензируется под свободной лицензией Creative Commons.