Skip to main content
Редактирование шага 8 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.

After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick.

Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.

Ваш вклад лицензируется под свободной лицензией Creative Commons.